Hikrobot MV-CT1CG0089/G

PRO version: what you get

Same sensor, other versions:

Same version, other sensor variant:

Wide-frame color use and trade-offs

Wide color frames with global exposure are the strength of MV-CT1CG0089/G. The 1 in Stacked BSI CMOS sensor records 4096 × 2160 px with 3.45 × 3.45 µm pixels and reaches 32.5 fps in Bayer GB 8 when lossless compression is enabled. Gigabit Ethernet, an 8-pin M12 X-Code connector, PoE and IP67 construction define the network installation.

The 8.9 MP format supports wide-component inspection, color print checks and several regions of interest in one view. UltraShort exposure covers 10 µs to 19 µs, while standard exposure runs from 20 µs to 10 sec. This range, the global shutter and machine-trigger modes allow short, synchronized captures; 2 × 2 and 4 × 4 binning or decimation reduce data for simpler decisions.

MV-CT1CG0050/G runs faster at 59.2 fps but records 2448 × 2048 px. MV-CT1CG0120/G keeps a 4096-pixel width, adds vertical detail to 3000 px and runs at 23.9 fps. MV-CT1CU0089/G produces the same 4096 × 2160 px color image at 42 fps over USB 3.0. Select MV-CT1CG0089/G when the network, PoE and sealed M12 connection are more important than the USB rate.

Documents

Selection and applications

Wide-component color inspection. Short-exposure print checks. Multi-region PoE imaging.

Minimum kit: Use a C-mount lens with the camera, an 8-pin M12 X-Code Gigabit Ethernet cable, and PoE or a separate 9–24 V DC supply.

Nearby in the range: MV-CT1CG0050/G — Prefer it for 59.2 fps if 2448 × 2048 px resolves the application; MV-CT1CG0120/G — Prefer it for 4096 × 3000 px color at 23.9 fps.

Compatible lens options

• MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1″ sensor; 12 MP optical class — headroom for this camera
• MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1″ sensor; 25 MP optical class — headroom for this camera

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

CT: M12 EthernetGigE

I/O & power cables

CT: power and I/O

Power

Power

Mounting

Camera mounts

Protection

CT: IP67 covers

All accessory families →

FAQ

What lenses are suggested for MV-CT1CG0089/G and its 1 in sensor?

The C-mount choices are MVL-KF1628M-12MP and MVL-KF5024M-25MP. Both listed image sizes cover the 1 in sensor. Their 12 MP and 25 MP resolution classes exceed the camera's 4096 × 2160 px image, meeting the documented sensor-coverage and resolution criteria.

Can PoE carry both supply and network data for MV-CT1CG0089/G?

Yes. The 8-pin M12 X-Code Gigabit Ethernet connection supports PoE and 1000 Mbit/s transfer, with 100 Mbit/s compatibility. Typical consumption is 1.9 W at 12 V DC. When separate power is preferred, the M8 connection accepts 9 V DC to 24 V DC and also carries I/O.

What is the UltraShort exposure range on MV-CT1CG0089/G during capture?

UltraShort exposure is listed from 10 µs to 19 µs. Standard exposure then covers 20 µs to 10 sec. Combined with the global shutter, Trigger Width and Trigger Controlled functions, these ranges support synchronized capture of moving color features under short illumination intervals.

How much full-frame throughput does MV-CT1CG0089/G provide?

The stated maximum is 32.5 fps at 4096 × 2160 px in Bayer GB 8 when lossless compression is enabled. Color output also includes higher Bayer depths, YUV422 variants, RGB 8 and BGR 8, while Mono 8 is available when the processing chain needs intensity only.

Under what conditions is MV-CT1CG0089/G rated IP67?

The IP67 rating applies when the lens, lens cap and wiring are installed properly. The 29 mm × 29 mm × 42 mm body operates across –30 °C to 60 °C and 20% RH to 95% RH without condensation. The camera weighs approximately 124 g.