Area camera · CT series
Hikrobot MV-CT1MG0050/G
- Lead time
- from 5 days
- Warranty
- 36 months
PRO version: what you get
Same sensor, other versions:
Same version, other sensor variant:
Five-megapixel mono use cases
A 2448 × 2048 px global-shutter image at 59.2 fps defines MV-CT1MG0050/G. Its monochrome Stacked BSI CMOS sensor uses a 2/3 in format and 3.45 × 3.45 µm pixels. Mono 8 reaches the listed rate with lossless compression enabled, while the 8-pin M12 X-Code Gigabit Ethernet interface and PoE support a sealed network installation.
The 5 MP frame suits moving-surface inspection, multiple edge measurements and component-position checks where color is not part of the decision. High-sensitivity exposure starts at 5 µs for short illumination, and Trigger Width or Trigger Controlled operation can coordinate a frame with the process. The IP67 enclosure and –30 °C to 60 °C working range support correctly sealed shop-floor placement.
MV-CT1MG0032/G runs at 77.5 fps with 2048 × 1536 px, offering higher speed at lower detail. MV-CT1MG0060/R raises horizontal sampling to 3072 px but uses a rolling shutter and runs at 40.0 fps. MV-CT0MU0050/G matches 2448 × 2048 px and reaches 80 fps through USB 3.0, but is IP40. Choose MV-CT1MG0050/G for global-shutter 5 MP imaging with PoE and IP67.
Specifications
| Shutter | global |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 24.5 fps @ Mono8, resolution 2448×2048 px; 59.2 fps @ lossless compression, Mono8, resolution 2448×2048 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Control interface | not available |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 1.5 W (typical) @ DC, fast heat balance off, supply voltage 12 V |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 124 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Moving monochrome surface inspection. Multi-edge dimensional checks. PoE component-position analysis.
| Lenses | MVL-KF1628M-12MP, MVL-KF5024M-25MP |
|---|
Minimum kit: Connect the camera, a C-mount lens and an 8-pin M12 X-Code Gigabit Ethernet cable, then supply PoE or 9–24 V DC power.
Nearby in the range: MV-CT1MG0032/G — Prefer it for 77.5 fps when 2048 × 1536 px is sufficient; MV-CT1MG0060/R — Prefer it for 3072 × 2048 px at 40.0 fps when rolling shutter is acceptable.
Compatible lens options
- MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 2/3″ sensor; 12 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 2/3″ sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CT: M12 EthernetGigE
- I/O & power cables
- CT: power and I/O
- Power
- Power
- Mounting
- Camera mounts
- Protection
- CT: IP67 covers
FAQ
Which optics are listed for MV-CT1MG0050/G and its 2/3 in sensor?
MVL-KF1628M-12MP and MVL-KF5024M-25MP are the suggested C-mount lenses. Both image sizes cover the 2/3 in sensor. The lens classes of 12 MP and 25 MP exceed the camera's 2448 × 2048 px image, meeting the stated coverage and nominal-resolution conditions.
What supply choices are available for MV-CT1MG0050/G?
The 8-pin M12 X-Code Gigabit Ethernet link supports PoE and carries data at 1000 Mbit/s, with 100 Mbit/s compatibility. Typical draw is 1.5 W at 12 V DC. The 8-pin M8 A-Code connector provides another route for 9 V DC to 24 V DC power plus I/O.
How does MV-CT1MG0050/G preserve moving-part geometry?
Its global shutter exposes the 2448 × 2048 px image together. Mono 8 runs at 59.2 fps with lossless compression enabled, and high-sensitivity exposure can start at 5 µs. Trigger Width and Trigger Controlled operation can synchronize the short exposure with object arrival.
What gain and exposure modes are available on MV-CT1MG0050/G?
High-full-well-capacity operation covers 0 dB to 12.8 dB gain and 30 µs to 10 sec exposure. High-sensitivity operation extends gain to 24 dB and begins at 5 µs. The camera also supports 2 × 2 and 4 × 4 binning and decimation for lower spatial data.
What sealing and climate limits apply to MV-CT1MG0050/G?
IP67 depends on correct installation of the lens, lens cap and wiring. The camera operates from –30 °C to 60 °C at 20% RH to 95% RH without condensation. Its 29 mm × 29 mm × 42 mm body has an approximate weight of 124 g.