Area camera · CT series
Hikrobot MV-CT1MG0032/G
- Lead time
- from 5 days
- Warranty
- 36 months
PRO version: what you get
Same sensor, other versions:
Same version, other sensor variant:
Resolution and speed in the mono range
Global-shutter monochrome detail at 2048 × 1536 px is the centre of MV-CT1MG0032/G. A 1/1.8 in Stacked BSI CMOS sensor uses 3.45 × 3.45 µm pixels and delivers 77.5 fps in Mono 8 with lossless compression enabled. Gigabit Ethernet leaves through an 8-pin M12 X-Code connector, and PoE permits shared power and data wiring.
The 3.2 MP frame supports moving-part feature inspection, edge measurement and assembly-position checks at moderate-to-high cycle rates. High-sensitivity operation begins at 5 µs exposure and extends gain to 24 dB; high-full-well-capacity operation starts at 30 µs and limits gain to 12.8 dB. Machine triggering and IP67 protection under correct installation suit process-side capture.
MV-CT1MG0020/G raises speed to 177.3 fps but limits the frame to 1624 × 1240 px. MV-CT1MG0050/G supplies 2448 × 2048 px at 59.2 fps. MV-CT0MU0032/G matches 2048 × 1536 px monochrome and reaches 104.8 fps over USB 3.0, though its housing is IP40. Choose MV-CT1MG0032/G when Gigabit Ethernet, PoE and sealed installation define the station.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/1.8″ |
| Sensor resolution | 2048×1536 px |
| Maximum frame rate | 39 fps @ Mono8, resolution 2048×1536 px; 77.5 fps @ lossless compression, Mono8, resolution 2048×1536 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Control interface | not available |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 1.5 W (typical) @ DC, fast heat balance off, supply voltage 12 V |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 124 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Monochrome feature inspection. Triggered edge measurement. Sealed PoE assembly checks.
| Lenses | MVL-KF1628M-12MP, MVL-KF5024M-25MP |
|---|
Minimum kit: Fit the camera with a C-mount lens, connect an 8-pin M12 X-Code Gigabit Ethernet cable, and use PoE or a 9–24 V DC supply.
Nearby in the range: MV-CT1MG0020/G — Prefer it for 177.3 fps if 1624 × 1240 px is enough; MV-CT1MG0050/G — Prefer it for 2448 × 2048 px at 59.2 fps.
Compatible lens options
- MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1/1.8″ sensor; 12 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1/1.8″ sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CT: M12 EthernetGigE
- I/O & power cables
- CT: power and I/O
- Power
- Power
- Mounting
- Camera mounts
- Protection
- CT: IP67 covers
FAQ
What C-mount lenses are paired with MV-CT1MG0032/G?
The suggested optics are MVL-KF1628M-12MP and MVL-KF5024M-25MP. Both cover the 1/1.8 in sensor. Their 12 MP and 25 MP lens classes stand above the 2048 × 1536 px output, giving both options the documented sensor-format and nominal-resolution coverage.
How is MV-CT1MG0032/G supplied over its Gigabit Ethernet link?
PoE is available through the 8-pin M12 X-Code Gigabit Ethernet connector. The interface operates at 1000 Mbit/s and is compatible with 100 Mbit/s. Typical consumption is 1.5 W at 12 V DC. The M8 A-Code port accepts 9 V DC to 24 V DC if the supply is separate.
Which MV-CT1MG0032/G mode supports the shortest exposure?
High-sensitivity operation reaches down to 5 µs and permits 0 dB to 24 dB gain. High-full-well-capacity operation starts at 30 µs with 0 dB to 12.8 dB gain. The global shutter and Trigger Width or Trigger Controlled modes support short, machine-timed imaging.
What is the full-image Mono 8 rate of MV-CT1MG0032/G over GigE?
The camera reaches 77.5 fps at 2048 × 1536 px in Mono 8 when lossless compression is enabled. Mono 10, 10Packed, 12 and 12Packed are also supported. Binning and decimation at 2 × 2 or 4 × 4 provide reduced spatial sampling where the full frame is unnecessary.
What installation limits apply to the MV-CT1MG0032/G IP67 housing?
The camera is IP67 after proper lens, lens cap and wiring installation. It operates from –30 °C to 60 °C and between 20% RH and 95% RH without condensation. The housing is 29 mm × 29 mm × 42 mm with an approximate mass of 124 g.