3D laser profile sensor · DP4000 series
Hikrobot MV-DP4430-03P
- Warranty
- 36 months
Mid-volume 4080-point line scanning
A 340 mm Z range at a 430 mm reference distance gives MV-DP4430-03P a mid-volume geometry within the 4080-point DP4000 group. Its X field expands from 153 mm near through 241 mm at reference to 329 mm far. Z resolution runs from 8.4 to 35.5 µm, stated repeatability is 2.27 µm, and ROI operation raises the scan rate from 2.5 to 49 kHz.
The field supports height, shape and edge acquisition across large moving parts. Gigabit Ethernet carries the 4080-point measurement stream, and a 12-pin M12 connection supplies 24 VDC with three differential inputs, one differential output and RS-232. The IP67 enclosure operates from 0 to 45 °C.
MV-DP4430-03P covers a larger volume than MV-DP4180, which has a 100 mm Z range and 100 mm reference field with 1.50 µm repeatability. MV-DP4940 extends depth to 900 mm and the reference field to 515 mm while retaining 4080 points and a 49 kHz ROI ceiling, with 9.45 µm repeatability. Pick MV-DP4430-03P for the intermediate 340 mm range and 2.27 µm repeatability.
Specifications
| Scan frame rate | 2.5 kHz within max. measurement range; 49 kHz max in ROI mode |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 12-pin M12 interface; differential input × 3, differential output × 1, RS-232 × 1 |
| Wavelength | 650 nm |
| Repeatability z-axis | 2.27 µm |
| Reference distance | 430 mm |
| Power supply | 24 VDC |
| Power consumption | 20 W @ 24 VDC |
| Ingress protection | IP67 |
| Operating temperature | 0 to 45 °C |
| Humidity | 20% to 85% RH |
| Dimensions | 213.5 × 110.5 × 56 mm |
| Weight | 1296 g |
| Data points per profile | 4080 |
| Measurement range (z axis) | 340 mm |
| Measurement range (x axis) near field of view | 153 mm |
| Measurement range (x axis) at reference distance | 241 mm |
| Measurement range (x axis) far field of view | 329 mm |
| Resolution (z axis) | 8.4 to 35.5 µm |
| Laser class | Class 3R |
Selection and applications
Large-part height measurement through a 340 mm Z range. Dense 4080-point contour capture across a 241 mm reference field. ROI-based line profiling at up to 49 kHz.
Minimum kit: MV-DP4430-03P, a Gigabit Ethernet cable, a 12-pin M12 power and I/O cable, and a 24 VDC supply form the minimum acquisition kit.
Nearby in the range: MV-DP4180 — Prefer it for a 100 mm Z range and 1.50 µm repeatability over a 100 mm reference field.; MV-DP4940 — Prefer it when the Z range must extend to 900 mm and the reference field to 515 mm..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
FAQ
How does the MV-DP4430-03P field widen through its Z range?
The Z range is 340 mm around a 430 mm reference distance. X width increases from 153 mm near through 241 mm at reference to 329 mm far, so the complete target and fixture path should be evaluated at all three planes.
What vertical performance is stated for MV-DP4430-03P?
The 4080-point profiler lists Z resolution from 8.4 to 35.5 µm and Z repeatability of 2.27 µm. Those values apply within the 340 mm measurement range and accompany the changing 153 to 329 mm X field.
How does ROI mode affect the MV-DP4430-03P acquisition rate?
The full-range rate is 2.5 kHz, while the maximum in ROI mode is 49 kHz. A reduced active region therefore allows faster profile acquisition for motion-driven inspection while the sensor's profile count is 4080 points.
Which interface and I/O channels connect MV-DP4430-03P to a machine?
Profile data uses 1000 Mbit/s Gigabit Ethernet with 100 Mbit/s Fast Ethernet compatibility. The 12-pin M12 interface carries the 24 VDC supply and provides three differential inputs, one differential output and one RS-232 channel.
What mechanical and electrical load does MV-DP4430-03P impose?
The housing measures 213.5 × 110.5 × 56 mm and weighs 1296 g. Power consumption is 20 W at 24 VDC, and the IP67 enclosure defines its ingress protection for the installation.
What ambient and laser figures apply to the MV-DP4430-03P?
The specified working temperature is 0 to 45 °C and humidity is 20 to 85% RH. Its optical source is a 650 nm laser classified as Class 3R, which must be included in the station's optical layout and operating controls.