Hikrobot MV-CE013-80GC V3.0

Discontinued

The manufacturer has discontinued this model.

Last buy date at the manufacturer: 2025-12-30.

Manufacturer-listed replacement:

Fast color capture and range position

Color capture at 1280 × 1024 and 89.9 fps defines the MV-CE013-80GC V3.0. Its SS CMOS sensor uses a global shutter, a 1/2.7-inch format and 4.0 µm pixels, while Gigabit Ethernet carries the image stream. This combination targets inspections where motion must be frozen and color remains part of the decision.

On a conveyor, the global shutter keeps the whole frame tied to one exposure interval as parts move through view. The 31 µs minimum exposure supports short acquisitions under suitable illumination, and the opto-isolated input and output provide electrical separation for machine-side sequencing. PoE can combine network data and power, while the 29 mm × 29 mm body suits a compact camera station.

MV-CE013-80GM V3.0 keeps the same resolution, 89.9 fps rate and global shutter but records mono images, so it fits intensity-based inspection. MV-CE050-31GC V3.0 raises resolution to 2592 × 1944 for finer color detail, with a rolling shutter and 24 fps ceiling. MV-CE050-30UC also provides 2592 × 1944 over USB3.0 at 44.7 fps when a host-side USB connection is preferred.

Specifications

Selection and applications

Color inspection of moving conveyor parts. Rapid position checks at 1280 × 1024. Machine sequencing through isolated I/O.

Minimum kit: Start with the MV-CE013-80GC V3.0, a C-mount lens, a Gigabit Ethernet cable, and either a PoE source or a 9 VDC to 24 VDC supply through the 6-pin Hirose connection.

Nearby in the range: MV-CE013-80GM V3.0 — Prefer it for mono acquisition at the same 1280 × 1024 and 89.9 fps.; MV-CE050-31GC V3.0 — Prefer it for 2592 × 1944 color images over Gigabit Ethernet at 24 fps.; MV-CE050-30UC — Prefer it for 2592 × 1944 acquisition over USB3.0 at 44.7 fps..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

Hirose 6-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What motion profile suits the global shutter and 89.9 fps rate?

The SS CMOS sensor exposes with a global shutter and delivers as many as 89.9 fps at 1280 × 1024. That pairing is suited to observing moving parts, checking repeated positions and capturing successive states without the row-by-row timing associated with a rolling shutter.

How should a lens be matched to the 1/2.7-inch color sensor?

Use a C-mount lens whose image coverage includes the 1/2.7-inch sensor format. The 1280 × 1024 array has 4.0 µm × 4.0 µm pixels, so lens selection should preserve the required field detail while providing the working field of view for the station.

Can MV-CE013-80GC V3.0 receive power through its network link?

Yes. The camera supports PoE on its Gigabit Ethernet connection. It can alternatively be supplied with 9 VDC to 24 VDC through the 6-pin Hirose connection; typical consumption is 2.6 W at 12 VDC.

Which electrical signals are available on the Hirose connector?

The 6-pin Hirose connector provides one opto-isolated input on Line 0, one opto-isolated output on Line 1 and one bidirectional non-isolated I/O on Line 2. The same connector also provides the external power path.

How does the GC version differ from MV-CE013-80GM V3.0?

Both versions use the SS global-shutter sensor at 1280 × 1024 and reach 89.9 fps over Gigabit Ethernet. MV-CE013-80GC V3.0 outputs color, whereas MV-CE013-80GM V3.0 outputs mono; their typical power figures are 2.6 W and 2.4 W at 12 VDC respectively.