Area camera · CH Series
Hikrobot MV-CH120-10UM V4.0
Active revision: MV-CH120-10UM V4.0 · PN 306301977
- Lead time
- from 5 days
- Warranty
- 36 months
USB monochrome detail and alternatives
A 4096 × 3000 monochrome image over USB 3.0 makes MV-CH120-10UM a direct-connect 12.3 MP measurement camera. Its 1.1-inch Sony IMX304 global-shutter sensor uses 3.45 µm pixels and reaches 30.5 fps. The combination supports detailed boundary, position and surface analysis where monochrome output and USB transfer fit the station architecture.
UltraShort exposure from 2 µs to 14 µs supports moving objects, while standard exposure extends from 15 µs to 10 sec. USB 3.0 can supply the camera at a typical 2.9 W from 5 V DC, with a separate 9–24 V DC input also listed. Hardware triggering is available through the 6-pin P7 connector's isolated input and output.
MV-CH120-11UM keeps the IMX304, 4096 × 3000 monochrome image and USB 3.0 but reaches 30.3 fps. MV-CH120-10CM changes to IMX253 and Camera Link, providing 50.9 fps in the full-width mode. MV-CH090-60GM V5.0 offers a wider, shorter 4200 × 2160 monochrome image at 13.5 fps over Gigabit Ethernet. Pick this model for 30.5 fps USB monochrome acquisition.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CH120-10UM discontinued | 306300483 / 306300484 | — | |
| MV-CH120-10UM V4.0 | 306301977 | V4.0 |
Specifications
| Shutter | global |
| Sensor model | Sony® IMX304 |
| Nominal optical sensor format | 1.1″ |
| Sensor resolution | 4096×3000 px |
| Maximum frame rate | 30.5 fps @ Mono8, resolution 4096×3000 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | USB 3.0 |
| Sensor technology | CMOS |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 72.2 dB |
| Signal-to-noise ratio | 40.2 dB |
| Exposure time | 2…14 µs @ ultra-short exposure mode; 15…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| USB 2.0 compatibility | yes |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V @ DC, external power supply |
| Power delivery | external power supply, USB |
| Power consumption | 2.9 W (typical) @ DC, USB 3.0, supply voltage 5 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -10…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 80 g (approx.) |
| Certification | CE, RoHS, KC |
| Port inventory | USB 3.0 (data) |
| Reverse image | horizontal, vertical |
Documents
Discontinued revisions — installed camera identification
MV-CH120-10UM · PN 306300483 / 306300484
| Maximum frame rate | 23.1 fps @ resolution 4096×3000 px |
| Gain | 0…20 dB |
| Pixel format | Mono8, Mono10, Mono10p, Mono12, Mono12p |
| Image buffer | 128 MB |
| Digital I/O connector | Hirose 6-pin |
| Power supply | 12 V @ DC, external power supply |
| Power consumption | 3.5 W (typical) @ DC, USB 3.0, supply voltage 5 V |
| Ingress protection | IP30 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Humidity | 20…80 % @ non-condensing |
| Dimensions | 44×29×59 mm |
| Weight | 100 g (approx.) |
Selection and applications
Detailed monochrome measurement over USB. Short-exposure checks of large moving parts. Surface-contrast inspection at 12.3 MP.
Minimum kit: MV-CH120-10UM, a 1.1-inch C-mount lens, a USB 3.0 cable, and either USB 3.0 bus power or a 9–24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH120-11UM — Prefer it for the same 4096 × 3000 IMX304 monochrome image at 30.3 fps; MV-CH120-10CM — Prefer it for 4096 × 3000 monochrome output at 50.9 fps over Camera Link; MV-CH090-60GM V5.0 — Prefer it for a 4200 × 2160 monochrome image at 13.5 fps over Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What monochrome image rate is provided through USB 3.0?
The listed maximum is 30.5 fps at 4096 × 3000. Output is monochrome from a 1.1-inch IMX304 global-shutter sensor, and the interface is compatible with USB 2.0 as well as USB 3.0.
Can the USB connection supply camera power during acquisition?
Yes. USB 3.0 power is supported, with typical consumption of 2.9 W at 5 V DC. A separate 9–24 V DC input is also available when the camera power and I/O are integrated into machine wiring.
What C-mount lens coverage does the IMX304 require?
Select a C-mount lens covering the 1.1-inch sensor and resolving the 3.45 µm pixel pitch over 4096 × 3000. The needed focal length follows from target dimensions and working distance.
How short can exposure be for a moving monochrome target?
UltraShort mode extends from 2 µs to 14 µs, while standard exposure begins at 15 µs and reaches 10 sec. The global shutter exposes the entire image together, supporting geometry-sensitive moving-part capture.
Which housing limits should be considered at installation?
The body measures 29 mm × 29 mm × 30 mm and weighs approximately 80 g. It operates from –10 °C to 50 °C, and IP40 applies when the lens and wiring are installed correctly.