Area camera · CS series
Hikrobot MV-CS020-10GM
- Warranty
- 36 months
Networked 2 MP imaging with IMX430
Sony IMX430 imaging at 1624 × 1240 and 60 fps defines MV-CS020-10GM. The 1/1.7-inch CMOS sensor uses a global shutter and 4.5 µm pixels, sending its 2 MP stream through Gigabit Ethernet. The body remains 29 mm square and 42 mm deep, with C-mount optics. This combination supports a compact network camera head for inspections that need a denser image than MV-CS016-10GM without moving to a USB interface.
The global shutter suits edge location, silhouette, presence and part-position work on moving production objects. At 1624 × 1240, the image area can contain more spatial samples than the 1440 × 1080 MV-CS016-10GM while the 60 fps rate maintains repeated observation. A 6-pin P7 connection provides one isolated input, one isolated output and one bidirectional line; the supply range is 9–24 V DC with typical use of 2.8 W at 12 V DC.
MV-CS020-10GC shares the IMX430, 1624 × 1240, 4.5 µm pixels, 60 fps and Gigabit Ethernet, and explicitly identifies Bayer RG 8 color output plus PoE. MV-CS020-10UM uses the same sensor and resolution through USB 3.0 at 90 fps in a shallower body. MV-CS020-61GM V5.0 remains a mono GigE choice at 60.7 fps but changes to a Stacked BSI sensor and adds high-full-well and high-sensitivity modes. Choose this model for its stated IMX430 GigE configuration.
Specifications
| Sensor type | CMOS, global shutter |
| Sensor model | Sony IMX430 |
| Sensor format | 1/1.7″ |
| Resolution | 1624 × 1240 px |
| Pixel size | 4.5 × 4.5 μm |
| Maximum frame rate | 60 fps |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin P7 connector; opto-isolated input ×1, opto-isolated output ×1, bi-directional non-isolated I/O ×1 |
| Lens mount | C-mount |
| Power supply | 9 to 24 VDC |
| Ingress protection | IP40 |
| Operating temperature | -30 to 60 °C |
| Storage temperature | -30 to 70 °C |
| Humidity | 20 to 95 % RH |
| Dimensions | 29 × 29 × 42 mm |
| Weight | 100 g |
| Compatibility | GigE Vision V2.0, GenICam |
| Power consumption typ mono | 2.8 W @ 12 VDC |
Selection and applications
IMX430 inspection at 1624 × 1240. Global-shutter edge and position capture. Gigabit Ethernet acquisition at 60 fps.
Minimum kit: MV-CS020-10GM, a C-mount lens, a Gigabit Ethernet cable, and a 9–24 V DC supply.
Nearby in the range: MV-CS020-10GC — Prefer it when Bayer RG 8 color and PoE are specified with the IMX430.; MV-CS020-10UM — Prefer it for an IMX430 USB 3.0 stream at 90 fps.; MV-CS020-61GM V5.0 — Prefer it for Mono 8 Stacked BSI capture and dual operating modes..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which sensor and pixel geometry are used in MV-CS020-10GM?
The camera uses a Sony IMX430 1/1.7-inch CMOS sensor with global shutter. Resolution is 1624 × 1240 and pixel pitch is 4.5 µm × 4.5 µm, defining both the optical coverage and the image sampling grid.
What full-frame rate is stated for the GigE stream?
The stated maximum is 60 fps at 1624 × 1240. Data travels over Gigabit Ethernet with Fast Ethernet support, and the camera follows GigE Vision V2.0 and GenICam listed in its technical parameters.
How is external power supplied to this IMX430 camera?
MV-CS020-10GM accepts 9–24 V DC. Typical consumption is 2.8 W at 12 V DC. The 6-pin P7 connector combines the electrical power path with one isolated input, one isolated output and one bidirectional I/O line.
What are the camera body size, mass and ingress rating?
The camera measures 29 mm × 29 mm × 42 mm, weighs 100 g and carries an IP40 rating. It is specified for operation from –30 °C to 60 °C and storage from –30 °C to 70 °C.
When does the USB IMX430 variant provide a speed change?
MV-CS020-10UM uses the Sony® IMX430 at the same 1624 × 1240 resolution and 4.5 µm pixel pitch, but USB 3.0 raises its stated rate to 90 fps and reduces body depth from 42 mm to 30 mm.