Hikrobot MV-CS032-10GC

Discontinued

The manufacturer has discontinued this model.

Applications and sensor positioning

A Sony® IMX265 global-shutter CMOS imager gives this color camera a 2048 × 1536 output at 38.1 fps. The 1/1.8-inch sensor uses 3.45 µm pixels, while Gigabit Ethernet carries Bayer RG 8 data. Exposure extends from a 1 µs UltraShort setting to 10 sec, defining a compact 3.1 MP platform for triggered color inspection rather than a general-purpose video source.

Color checks on moving parts, label verification and assembly-state inspection are direct fits for the global shutter and 38.1 fps acquisition rate. The opto-isolated input can accept a machine trigger, the opto-isolated output can coordinate illumination, and the bidirectional line is available for another control signal. PoE can combine power and data on the network run, while the 29 mm × 29 mm body suits restricted mounting spaces.

Within this group, MV-CS032-60GC keeps 2048 × 1536 color output but uses a Stacked BSI sensor and reaches 38.6 fps; select it when that sensor implementation is required. MV-CS050-10GC-PRO raises resolution to 2448 × 2048 with a Sony® IMX264 but runs at 24.2 fps. MV-CS050-10UC pairs that higher resolution with 60 fps over USB3.0, making it the alternative for a local high-rate host connection.

Specifications

Selection and applications

Triggered color inspection of moving parts. Label and assembly-state verification. Compact networked inspection stations.

Minimum kit: Use the MV-CS032-10GC camera, a C-mount lens for its 1/1.8-inch sensor, a Gigabit Ethernet cable, and either PoE or a 9 VDC to 24 VDC supply.

Nearby in the range: MV-CS032-60GC — Choose it for 2048 × 1536 color imaging with a Stacked BSI sensor at 38.6 fps.; MV-CS050-10GC-PRO — Choose it for 2448 × 2048 color output from a Sony® IMX264 at 24.2 fps.; MV-CS050-10UC — Choose it for 2448 × 2048 color acquisition at 60 fps over USB3.0..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

Hirose 6-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What image format and rate does MV-CS032-10GC deliver at full resolution?

The camera outputs 2048 × 1536 Bayer RG 8 color data at up to 38.1 fps. Its Sony® IMX265 is a 1/1.8-inch global-shutter CMOS sensor with 3.45 µm × 3.45 µm pixels, so the stated rate and sampling apply to the complete active image.

How short can exposure be for motion capture with MV-CS032-10GC?

UltraShort exposure mode covers 1 µs to 14 µs, followed by standard exposure from 15 µs to 10 sec. Together with the global shutter, the short end supports capture of moving features when the scene provides enough illumination.

Can MV-CS032-10GC receive power through its Ethernet connection?

Yes. The power specification is 9 VDC to 24 VDC and PoE is supported. Typical consumption is 2.4 W at 12 VDC. Gigabit Ethernet operates at 1000 Mbit/s and remains compatible with Fast Ethernet at 100 Mbit/s.

What lens format should be matched to the MV-CS032-10GC sensor?

Use a C-mount lens that covers the 1/1.8-inch sensor and resolves 3.45 µm sampling across 2048 × 1536 pixels. Lens focal length and aperture then follow the required scene width, working distance and available illumination.

What environmental limits apply when installing MV-CS032-10GC?

The operating range is –30 °C to 60 °C, with storage from –30 °C to 70 °C and 20% RH to 95% RH without condensation. The enclosure is IP40 when the lens is installed and the wiring is completed correctly.