Area camera · CS Series
Hikrobot MV-CS032-60GC
- Lead time
- from 5 days
- Warranty
- 36 months
Tasks and neighbouring cameras
Stacked BSI architecture distinguishes this 3.1 MP color camera at the 2048 × 1536 operating point. Its 1/1.8-inch global-shutter CMOS sensor has 3.45 µm pixels and produces Bayer GR 8 frames at 38.6 fps. Gigabit Ethernet, a 73.9 dB dynamic range and exposure from 5 µs to 10 sec combine for synchronized inspection with network cabling.
At 38.6 fps, the camera can follow moving components for color presence checks, orientation checks and repeated assembly inspection. The global shutter keeps the full frame on one exposure interval, while the 5 µs lower limit supports short illumination pulses. Hardware coordination is available through an opto-isolated input, an opto-isolated output and a bidirectional non-isolated line on the 6-pin P7 connector.
MV-CS032-60GM is the direct mono counterpart, matching the Stacked BSI sensor, resolution and 38.6 fps rate. MV-CS032-10GC instead uses the Sony® IMX265 and runs at 38.1 fps, with a 1 µs UltraShort exposure option. When a larger 2448 × 2048 color frame and 60 fps are needed near the host, MV-CS050-10UC moves the connection to USB3.0.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CS032-60GC | 306302425 | — | |
| MV-CS032-60GC V5.0 | 306302834 | V5.0 |
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/1.8″ |
| Sensor resolution | 2048×1536 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
| Part number | Maximum frame rate | Auto exposure | Power consumption | Gain | Exposure time |
|---|---|---|---|---|---|
MV-CS032-60GCAll specifications
| 38.6 fps @ BayerGR8, resolution 2048×1536 px | Off, Once, Continuous, trigger width | 2.3 W (typical) @ DC, supply voltage 12 V | 0…24 dB | 5…10000000 µs |
MV-CS032-60GC V5.0All specifications
| 38.9 fps @ BayerGR8, resolution 2048×1536 px | Off, Once, Continuous | 1.7 W (typical) @ DC, supply voltage 12 V | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
Documents
Selection and applications
Color presence checks on moving components. Triggered orientation inspection. Repeated assembly-state capture.
Minimum kit: Use the MV-CS032-60GC camera, a C-mount lens covering 1/1.8 inch, a Gigabit Ethernet cable, and either PoE or a 9 VDC to 24 VDC supply.
Nearby in the range: MV-CS032-60GM — Choose it for Mono 8 acquisition with the same 2048 × 1536 resolution and 38.6 fps rate; MV-CS032-10GC — Choose it for a Sony® IMX265 color sensor and exposure down to 1 µs; MV-CS050-10UC — Choose it for 2448 × 2048 color frames at 60 fps through USB3.0.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What distinguishes the imager inside MV-CS032-60GC?
MV-CS032-60GC uses a Stacked BSI CMOS sensor in 1/1.8-inch format. It has a global shutter, 3.45 µm × 3.45 µm pixels and 73.9 dB dynamic range, producing 2048 × 1536 Bayer GR 8 color frames.
Is MV-CS032-60GC fast enough for repeated conveyor inspections?
The full-frame maximum is 38.6 fps at 2048 × 1536 Bayer GR 8. Its global shutter exposes the frame simultaneously, and exposure can be set as short as 5 µs, both relevant to repeated capture of moving components.
How are data and power connected to MV-CS032-60GC?
Images use Gigabit Ethernet at 1000 Mbit/s, with Fast Ethernet at 100 Mbit/s also supported. Power can come from PoE or a 9 VDC to 24 VDC source; typical consumption is 2.3 W at 12 VDC.
What optics interface and sensor coverage does MV-CS032-60GC require?
The mechanical lens interface is C-mount. Select an optic whose image circle covers the 1/1.8-inch sensor and whose resolution is appropriate for 3.45 µm pixels across the 2048 × 1536 active frame.
How does MV-CS032-60GC differ from the MV-CS032-60GM variant?
Both variants use a 1/1.8-inch Stacked BSI global-shutter sensor and reach 38.6 fps at 2048 × 1536. MV-CS032-60GC outputs Bayer GR 8 color data, whereas MV-CS032-60GM outputs Mono 8.