Area camera · CS series
Hikrobot MV-CS032-10GM
- Lead time
- from 5 days
- Warranty
- 36 months
Where the IMX265 model fits
Sony® IMX265 imaging at 2048 × 1536 and 38.1 fps sets the operating point of this compact CS model. The 1/1.8-inch CMOS sensor uses a global shutter, and Gigabit Ethernet supports both 1000 Mbit/s and 100 Mbit/s links. A 29 mm × 29 mm × 42 mm housing and C-mount keep the optical and mechanical stack small for a network-connected inspection head.
The global shutter supports dimensional checks and feature localisation on indexed or continuously moving parts. A 6-pin P7 connection supplies one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O, allowing acquisition to follow a machine event and signal its result. A network span can reach 100 m, while PoE removes the need for a separate local supply cable.
MV-CS032-10GC shares the IMX265, 2048 × 1536 resolution and 38.1 fps rate, and explicitly provides color output. MV-CS032-60GM retains the same resolution, changes to a Stacked BSI sensor and records Mono 8 at 38.6 fps. For more spatial sampling, MV-CS050-20GM V2.0 increases the frame to 2592 × 2048 with an OnSemi XGS5000, though its maximum rate is 22.7 fps.
Specifications
| Shutter | global |
| Sensor model | Sony® IMX265 |
| Nominal optical sensor format | 1/1.8″ |
| Sensor resolution | 2048×1536 px |
| Maximum frame rate | 38.1 fps @ Mono8, resolution 2048×1536 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 71.5 dB |
| Signal-to-noise ratio | 40 dB |
| Exposure time | 1…14 µs @ ultra-short exposure mode; 15…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 2.2 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Triggered dimensional inspection. Feature localisation on moving parts. Long-run network camera placement.
Minimum kit: Use the MV-CS032-10GM camera, a C-mount lens for the 1/1.8-inch sensor, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC power source.
Nearby in the range: MV-CS032-10GC — Choose it when explicit color output from the Sony® IMX265 is required at 38.1 fps; MV-CS032-60GM — Choose it for Mono 8 output from a Stacked BSI sensor at 38.6 fps; MV-CS050-20GM V2.0 — Choose it for a 2592 × 2048 mono frame at 22.7 fps over Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which sensor and shutter arrangement are used in MV-CS032-10GM?
The camera uses a Sony® IMX265 CMOS sensor in 1/1.8-inch format with a global shutter. It records 2048 × 1536 pixels at up to 38.1 fps, placing simultaneous exposure across the frame at the centre of its motion-handling characteristics.
How far can the MV-CS032-10GM Ethernet link be extended?
The listed maximum transmission distance is 100 m. The data connection is Gigabit Ethernet at 1000 Mbit/s and is also compatible with Fast Ethernet at 100 Mbit/s, so host and switch selection should follow the required image throughput.
What are the power options for a remote MV-CS032-10GM installation?
MV-CS032-10GM accepts 9 VDC to 24 VDC and also supports PoE. Typical consumption is 2.2 W at 12 VDC. PoE is the direct way to carry data and camera power along the same Ethernet run.
Which control signals are available on the MV-CS032-10GM connector?
The 6-pin P7 connector provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O. These lines support a hardware-triggered station and a return signal to associated machine controls.
What housing and ambient conditions suit MV-CS032-10GM?
The body measures 29 mm × 29 mm × 42 mm and weighs 100 g. Operation is specified from –30 °C to 60 °C and 20% RH to 95% RH. The listed enclosure protection rating is IP40.