Area camera · CS Series
Hikrobot MV-CS200-10UM
- Warranty
- 36 months
Where the 20 MP mono USB model fits
High-density monochrome capture through USB is the operating role of the MV-CS200-10UM. Its 20 MP Sony® IMX183 rolling-shutter CMOS sensor supplies 5472 × 3648 Mono 8 images at up to 19.2 fps over USB3.0. The sensor spans a 1-inch format with 2.4 µm pixels. Dynamic range is 65.5 dB, exposure is adjustable from 44 µs to 0.83 sec and gain spans 0 dB to 24 dB, giving the integration controls needed around the large pixel array.
Fine dimensional analysis, high-density edge extraction and surface inspection across a wide field can use the 5472 × 3648 mono output. The sequence rate supports repeated captures where motion is compatible with a rolling shutter and the configured exposure. USB3.0 can supply the camera at 5 VDC; a 9 VDC to 24 VDC alternative enters through the 6-pin P7 connector with the I/O lines. The 29 mm × 29 mm × 30 mm body uses C-mount optics for the 1-inch sensor.
MV-CS200-10UC matches the 5472 × 3648 resolution, 19.2 fps and USB3.0 connection but changes to Bayer GB 8 color. MV-CS200-10GM keeps mono output and the same resolution while replacing USB with Gigabit Ethernet and PoE; its maximum falls to 5.9 fps. MV-CS120-10UM V5.0 reduces sampling to 4024 × 3036 and raises the USB mono ceiling to 29.4 fps for rate-led selections.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Note | Version | |
|---|---|---|---|---|
| MV-CS200-10UM discontinued | 306301938 / 306302904 | exposure 44 μs–0.83 s, 2.3 W consumption | — | |
| MV-CS200-10UM V5.0 | 306303296 / 306303721 | exposure 14 μs–0.86 s, 1.6 W consumption | V5.0 |
Specifications
| Product type | 20 MP USB 3.0 Area Scan Camera |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX183 |
| Sensor format | 1″ |
| Resolution | 5472 × 3648 |
| Pixel size | 2.4 µm × 2.4 µm |
| Maximum frame rate | 19.2 fps @ 5472 × 3648 Mono 8 |
| Mono color | Mono |
| Dynamic range | 65.5 dB |
| Exposure time | 44 μs to 0.83 sec |
| Gain | 0 dB to 24 dB |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), bi-directional non-isolated I/O × 1 (Line 2) |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 2.3 W @ 5 VDC (USB3.0 provides power supply) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –30 °C to 60 °C (–22 °F to 140 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.18 lb.) |
| Certification | CE-EMC, KC, UL |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
High-density mono measurement at 5472 × 3648. USB-powered wide-field edge extraction. 20 MP surface inspection at 19.2 fps.
Minimum kit: MV-CS200-10UM camera, a C-mount lens, a USB3.0 cable, and either USB3.0 power or a 9 VDC to 24 VDC supply through the 6-pin P7 connector form the minimum operating set.
Nearby in the range: MV-CS200-10UC — Prefer it when Bayer GB 8 color is required at 5472 × 3648 and 19.2 fps.; MV-CS200-10GM — Prefer it when mono imaging must use Gigabit Ethernet and PoE.; MV-CS120-10UM V5.0 — Prefer it when 29.4 fps is required and 4024 × 3036 mono sampling is sufficient..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What Mono 8 stream does the Sony® IMX183 provide here?
The 20 MP Sony® IMX183 supplies 5472 × 3648 Mono 8 frames at up to 19.2 fps. It is a rolling-shutter CMOS sensor with a 1-inch optical format and 2.4 µm × 2.4 µm pixels. The primary transfer interface is USB3.0, with USB2.0 also listed.
Can USB3.0 power the camera without the P7 supply input?
Yes. USB3.0 power supply is supported, and typical consumption is 2.3 W at 5 VDC in that configuration. A separate 9 VDC to 24 VDC supply can be connected through the 6-pin P7 interface when the station also uses the available I/O wiring.
How should C-mount optics be sized for this mono camera?
The selected C-mount lens must cover the 1-inch Sony® IMX183 sensor and resolve the needed detail across 5472 × 3648 with a 2.4 µm pixel pitch. Correct lens installation and wiring are also conditions for the stated IP40 enclosure rating.
What exposure control is available for moving subjects?
Exposure ranges from 44 µs to 0.83 sec. Because the sensor uses a rolling shutter, the target's movement during capture must fit the inspection tolerance; shorter exposure can help when illumination allows. The listed full-frame rate is 19.2 fps at 5472 × 3648.
When should the lower-resolution MV-CS120-10UM be considered?
MV-CS120-10UM V5.0 provides 4024 × 3036 Mono 8 at 29.4 fps, while MV-CS200-10UM provides 5472 × 3648 at 19.2 fps. Both use USB 3.0 and C-mount. The 12.2 MP model fits a higher sequence-rate need when its smaller pixel array is sufficient.