Area camera · CT series
Hikrobot MV-CT0MU0089/G
- Warranty
- 36 months
BASE version: what you get
This camera comes in three versions on the same sensor — they differ in protection, connectors and integrated optics:
- Type-C interface
- IP40 (under proper lens installation and wiring)
- Control interface not supported
Same sensor, other versions:
Same version, other sensor variant:
Applications and resolution trade-offs
Wide 4096 × 2160 px monochrome acquisition is the central capability of MV-CT0MU0089/G. The 1 in Stacked BSI CMOS sensor uses 3.45 × 3.45 µm pixels and a global shutter, delivering 42 fps in Mono 8 over USB 3.0. A Type-C data connector, USB power and the 29 mm × 29 mm × 30 mm enclosure suit compact host-connected imaging assemblies.
The long horizontal frame supports inspection of wide parts, multiple features across one view and fine edge or surface analysis. Global exposure makes the geometry usable when parts move between trigger events, while the 20 µs lower exposure limit supports short illumination intervals. Binning and decimation at 2 × 2 or 4 × 4 provide lower-data modes when the full 4096 × 2160 px image is unnecessary.
MV-CT0MU0050/G offers 2448 × 2048 px at 80 fps, almost twice the rate when its lower horizontal sampling is enough. MV-CT0MU0120/G extends the vertical dimension to 3000 px and 12 MP but lowers speed to 31 fps. MV-CT0MU0089/G is the choice between them when a 4096-pixel-wide global-shutter image matters more than 80 fps and a 2160-pixel height covers the target.
Specifications
| Order code | MV-CT0MU0089/G/NN/NN |
| Product type | 8.9 MP USB 3.0 Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 1″ |
| Resolution | 4096 × 2160 px |
| Pixel size | 3.45 × 3.45 μm |
| Maximum frame rate | 42 fps @ 4096 × 2160 Mono 8 |
| Mono color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Dynamic range | 67.4 dB |
| Exposure time | 20 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Trigger Width and Trigger Controlled |
| Gain | 0 dB to 12 dB |
| SNR | 43.9 dB |
| Data interface | USB 3.0, compatible with USB 2.0 |
| Digital I/O | 8-pin M8 A-Code aviation connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Power supply | 9 VDC to 24 VDC, supports USB 3.0 power supply |
| Power consumption typ | Typ. 1.9 W @ 5 VDC (USB 3.0 provides power supply) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –30 °C to 60 °C (–22 °F to 140 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 72 g (0.2 lb.) |
| Certification | CE, RoHS, KC |
| Compatibility | USB3 Vision, GenICam |
| Data interface connector | Type-C interface |
| Control interface | Not supported |
| Client software | MVS or third-party software meeting with USB3 Vision Protocol |
Selection and applications
Wide-part feature inspection. Global-shutter edge analysis. Triggered monochrome surface capture.
| Lenses | MVL-KF1628M-12MP, MVL-KF5024M-25MP |
|---|
Minimum kit: Build the station with the camera, a C-mount lens, a USB 3.0 Type-C cable, and USB power or an external 9–24 V DC source.
Nearby in the range: MV-CT0MU0050/G — Prefer it for 80 fps when 2448 × 2048 px covers the inspection.; MV-CT0MU0120/G — Prefer it when 4096 × 3000 px is needed and 31 fps is sufficient..
Compatible lens options
- MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1 sensor; 12 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1 sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CT: USB Type-CUSB 3.0
- I/O & power cables
- CT: power and I/O
- Power
- Power
- Mounting
- Camera mounts
FAQ
What lenses are listed for the 1 in MV-CT0MU0089/G sensor?
MVL-KF1628M-12MP and MVL-KF5024M-25MP are the suggested C-mount lenses. Both listed image sizes cover the camera's 1 in sensor. Their 12 MP and 25 MP resolution classes are above the 4096 × 2160 px output, so both satisfy the stated format and resolution checks.
How are images and power carried for MV-CT0MU0089/G?
A Type-C port carries USB 3.0 image data and can power the camera at a typical 1.9 W at 5 V DC. USB 2.0 compatibility is included. The separate 8-pin M8 A-Code connector provides power and I/O when using a 9 V DC to 24 V DC external source.
Can MV-CT0MU0089/G inspect a moving wide target at full frame?
Yes, where 42 fps matches the process. The global shutter exposes all 4096 × 2160 px together, avoiding rolling-shutter shape skew. Exposure starts at 20 µs, and Trigger Width plus Trigger Controlled operation can synchronize the frame to a part sensor or lighting event.
Which monochrome output modes does MV-CT0MU0089/G support?
Pixel formats are Mono 8, 10, 10Packed, 12 and 12Packed. Binning and decimation each support 1 × 1, 2 × 2 and 4 × 4. The image can also be reversed horizontally or vertically, providing acquisition-side choices for bit depth, sampling and orientation.
What protection and temperature limits apply to MV-CT0MU0089/G?
The camera is IP40 under correct lens installation and wiring, so the station should provide the needed environmental protection. Its operating temperature is –30 °C to 60 °C, and allowed humidity is 20% RH to 95% RH without condensation. Approximate mass is 72 g.