Area camera · CT series
Hikrobot MV-CT1CG0032/G
- Lead time
- from 5 days
- Warranty
- 36 months
PRO version: what you get
Same sensor, other versions:
Same version, other sensor variant:
Image detail, speed and alternatives
A 2048 × 1536 px global-shutter color image at 77.5 fps defines MV-CT1CG0032/G. Its 1/1.8 in Stacked BSI CMOS sensor uses 3.45 × 3.45 µm pixels, with Bayer GR 8 reaching the stated rate when lossless compression is enabled. Gigabit Ethernet, PoE and the 8-pin M12 X-Code connection support a sealed network camera arrangement.
The 3.2 MP frame suits color-dependent assembly checks, label inspection and feature localization on moving products. High-sensitivity exposure starts at 5 µs, while high-full-well-capacity operation provides a separate 30 µs starting point and lower gain ceiling. Global capture, machine-trigger modes and IP67 protection under correct installation allow the camera to sit close to the process.
MV-CT1CG0020/G raises throughput to 177.3 fps but reduces the image to 1624 × 1240 px. MV-CT1CG0050/G supplies 2448 × 2048 px at 59.2 fps. For the same 2048 × 1536 px color image, MV-CT1CU0032/G uses USB 3.0 and reaches 104.8 fps. Choose MV-CT1CG0032/G when Gigabit Ethernet and PoE are required at the intermediate resolution.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1/1.8″ |
| Sensor resolution | 2048×1536 px |
| Maximum frame rate | 39 fps @ BayerGR8, resolution 2048×1536 px; 77.5 fps @ lossless compression, BayerGR8, resolution 2048×1536 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, BayerGR8, BayerGR10, BayerGR10Packed, BayerGR12, BayerGR12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Control interface | not available |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 1.6 W (typical) @ DC, fast heat balance off, supply voltage 12 V |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 124 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Color-dependent assembly checks. Moving label-feature inspection. PoE machine-vision capture.
| Lenses | MVL-KF1628M-12MP, MVL-KF5024M-25MP |
|---|
Minimum kit: Pair the camera with a C-mount lens, an 8-pin M12 X-Code Gigabit Ethernet cable, and either PoE or a 9–24 V DC power connection.
Nearby in the range: MV-CT1CG0020/G — Prefer it for 177.3 fps if 1624 × 1240 px is enough; MV-CT1CG0050/G — Prefer it when 2448 × 2048 px is needed and 59.2 fps covers the cycle.
Compatible lens options
- MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1/1.8″ sensor; 12 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1/1.8″ sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CT: M12 EthernetGigE
- I/O & power cables
- CT: power and I/O
- Power
- Power
- Mounting
- Camera mounts
- Protection
- CT: IP67 covers
FAQ
What optics are recommended for MV-CT1CG0032/G imaging?
MVL-KF1628M-12MP and MVL-KF5024M-25MP are the listed C-mount selections. Both cover the camera's 1/1.8 in sensor. The 12 MP and 25 MP lens classes also exceed the 2048 × 1536 px output, so both satisfy the stated sensor-size and nominal-resolution conditions.
Can MV-CT1CG0032/G receive power over the image link?
Yes. PoE is supported over the 8-pin M12 X-Code Gigabit Ethernet connection. The network operates at 1000 Mbit/s and also supports 100 Mbit/s. Typical consumption is 1.6 W at 12 V DC, and a 9 V DC to 24 V DC separate supply can use the M8 power and I/O connection.
How does MV-CT1CG0032/G handle short color exposures?
In high-sensitivity operation, exposure extends from 5 µs to 10 sec with gain up to 24 dB. High-full-well-capacity operation starts at 30 µs and limits gain to 12.8 dB. The global shutter and 77.5 fps full-frame rate make short, triggered capture usable on moving scenes.
What trigger and I/O resources are present on MV-CT1CG0032/G?
The camera supports Trigger Width and Trigger Controlled exposure in addition to Off, Once and Continuous modes. Its 8-pin M8 A-Code connector provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line for coordination with equipment.
What enclosure conditions maintain MV-CT1CG0032/G protection?
IP67 protection is stated under proper lens, lens cap and wiring installation. The 29 mm × 29 mm × 42 mm camera operates between –30 °C and 60 °C and at 20% RH to 95% RH without condensation. Its approximate weight is 124 g.