Area camera · CT series
Hikrobot MV-CT2MG0050/G/16LC/WN
- Lead time
- from 5 days
- Warranty
- 36 months
MAX version: what you get
Same version, other sensor variant:
Integrated 5 MP inspection head
Integrated lighting and optics distinguish MV-CT2MG0050/G/16LC/WN from the standard 5 MP camera. A 16 mm liquid lens on C-mount and white illumination are assembled around a monochrome Stacked BSI CMOS sensor. The 2/3 in global-shutter device records 2448 × 2048 at up to 59.2 fps in losslessly compressed Mono 8, using 3.45 × 3.45 µm pixels and Gigabit Ethernet output.
This arrangement supports compact inspection heads where the camera, 16 mm liquid lens and integrated white light must be mechanically grouped. The light provides a 6000 K to 9000 K white output over a 90° irradiation angle and is rated at approximately 7.7 W. Trigger Width and Trigger Controlled modes coordinate the global exposure with moving hardware. The complete 77 mm × 77 mm × 123.8 mm assembly is IP67 when its lens cap and cabling are installed correctly.
MV-CT2MG0050/G matches the 2448 × 2048 and 59.2 fps imaging performance but uses a separate C-mount lens in a 42 mm × 42 mm × 43 mm body. The integrated MV-CT2MG0032/G/16LC/WN offers 2048 × 1536 at 77.5 fps for a faster, lower-resolution task. MV-CT2MG0120/G/16LC/WN raises the integrated format to 4096 × 3000 at 23.9 fps for greater spatial sampling.
Specifications
| Shutter | global |
| Sensor model | Stacked BSI1 |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px1 |
| Maximum frame rate | 24.5 fps @ uncompressed, Mono8, camera body, resolution 2448×2048 px; 59.2 fps @ lossless compression, Mono8, camera body, resolution 2448×2048 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | GigE1 |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm1 |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB1 |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Control interface | M12 8-pin A-coded |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Power supply | 9…24 V @ DC, external power supply |
| Power delivery | external power supply |
| PoE support | yes1 |
| Power consumption | 1.6 W (typical) @ DC, not controlling external device, fast heat balance off, camera body, supply voltage 24 V |
| Ingress protection | IP671 |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing1 |
| Dimensions | 42×42×43 mm @ camera body |
| Weight | 120 g (approx.) @ camera body |
| Certification | CE, RoHS, KC |
| Physical sensor diagonal | 11 mm1 |
| Reverse image | horizontal, vertical |
Kit contents
Integrated lens
| Lens mount | C-mount |
| Focal length | 16 mm |
| Integrated lens type | liquid lens |
Lens cap with light
| Integrated light color | white |
| Color temperature | 6000…9000 K |
| Power consumption | 7.7 W (approx.) |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | 0…40 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Weight | 330 g |
| Compatible products | CT Series Area Scan Cameras (MAX version) |
| Bore diameter | 38.5 mm |
| Inner length | 66 mm |
| Irradiation angle | 90 ° |
| Outer length | 70.5 mm |
1 unofficial data
Documents
Selection and applications
Integrated-light dimensional inspection. Global-shutter 5 MP capture. Sealed 16 mm inspection heads.
Minimum kit: MV-CT2MG0050/G/16LC/WN with its 16 mm C-mount liquid lens, an 8-pin M12 X-Code Gigabit Ethernet cable, and PoE or 9–24 V DC power.
Nearby in the range: MV-CT2MG0050/G — Choose the standard C-mount body for separately selected optics; MV-CT2MG0032/G/16LC/WN — Choose 2048 × 1536 capture and a higher 77.5 fps ceiling; MV-CT2MG0120/G/16LC/WN — Choose 4096 × 3000 capture when 23.9 fps is adequate.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- Power
- Power
- Mounting
- Camera mounts
FAQ
Does MV-CT2MG0050/G/16LC/WN require a separate machine-vision lens?
The /16LC/WN assembly already includes a 16 mm liquid lens on a C-mount. The completed unit measures 77 mm × 77 mm × 123.8 mm, compared with the 42 mm × 42 mm × 43 mm camera body inside it. Optical selection is therefore defined by the integrated 16 mm configuration.
What illumination is built into this 5 MP integrated version?
It includes white light rated at approximately 7.7 W. The listed color temperature is 6000 K to 9000 K, and the irradiation angle is 90° to the horizontal direction. The lens-cap bore is Ø38.5 mm, with the light arranged as part of the optical assembly.
Can PoE operate the camera portion of the /16LC/WN assembly?
Yes. The camera supports PoE and also accepts 9 V DC to 24 V DC. Its typical consumption is 1.6 W at 24 V DC under the stated condition, while the integrated light is rated separately at approximately 7.7 W. Gigabit Ethernet connects through an 8-pin M12 X-Code interface.
What is the shortest exposure for high-sensitivity inspection?
High-sensitivity operation allows exposure from 5 µs to 10 sec and gain from 0 dB to 24 dB. High full well capacity operation starts at 30 µs and limits gain to 12.8 dB. Both operate with the 2448 × 2048 global-shutter sensor.
What operating temperatures apply to the camera and lens cap?
The camera body is specified for –30 °C to 60 °C. The integrated lens cap is specified for 0 °C to 40 °C, making that narrower interval the relevant working range for the complete optical assembly. Both camera and lens cap list storage from –30 °C to 80 °C.