Area camera · CT series
Hikrobot MV-CT2MG0120/G/16LC/WN
- Lead time
- from 5 days
- Warranty
- 36 months
MAX version: what you get
Same version, other sensor variant:
Integrated optics at 12 MP
A 4096 × 3000 global-shutter imager, 16 mm liquid lens and integrated white light are combined in MV-CT2MG0120/G/16LC/WN. The 12 MP monochrome Stacked BSI CMOS sensor spans a 1.1 in format with 3.45 × 3.45 µm pixels. It produces up to 23.9 fps in Mono 8 with lossless compression over Gigabit Ethernet, while exposure ranges from 10 µs in UltraShort mode to 10 sec in standard mode.
The assembly addresses large-field inspection where dense sampling, synchronized exposure and integrated optics with white light are required. Its white source covers 6000 K to 9000 K over a 90° irradiation angle and is rated at approximately 7.7 W. The unit measures 77 mm × 77 mm × 123.8 mm, uses Trigger Width or Trigger Controlled exposure, and is IP67 when the lens, cap and cable are fitted correctly.
MV-CT2MG0120/G has the same 4096 × 3000, 23.9 fps imaging core in a 42 mm × 42 mm × 43 mm C-mount body for separate optics. MV-CT2MG0050/G/16LC/WN keeps the integrated 16 mm lens and light but offers 2448 × 2048 at 59.2 fps. MV-CT2MG0200/R/16LC/WN increases resolution to 5472 × 3648 at 22.3 fps, using a rolling shutter rather than this model's global shutter.
Specifications
| Shutter | global |
| Sensor model | Stacked BSI1 |
| Nominal optical sensor format | 1.1″ |
| Sensor resolution | 4096×3000 px1 |
| Maximum frame rate | 9.9 fps @ uncompressed, Mono8, camera body, resolution 4096×3000 px; 23.9 fps @ lossless compression, Mono8, camera body, resolution 4096×3000 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | GigE1 |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm1 |
| Dynamic range | 67.2 dB |
| Signal-to-noise ratio | 44.2 dB1 |
| Exposure time | 10…19 µs @ ultra-short exposure mode; 20…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…12 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Control interface | M12 8-pin A-coded |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Power supply | 9…24 V @ DC, external power supply |
| Power delivery | external power supply |
| PoE support | yes1 |
| Power consumption | 1.9 W (typical) @ DC, not controlling external device, fast heat balance off, camera body, supply voltage 24 V |
| Ingress protection | IP671 |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing1 |
| Dimensions | 42×42×43 mm @ camera body |
| Weight | 120 g (approx.) @ camera body |
| Certification | CE, RoHS, KC |
| Physical sensor diagonal | 17.6 mm1 |
| Reverse image | horizontal, vertical |
Kit contents
Integrated lens
| Lens mount | C-mount |
| Focal length | 16 mm |
| Integrated lens type | liquid lens |
Lens cap with light
| Integrated light color | white |
| Color temperature | 6000…9000 K |
| Power consumption | 7.7 W (approx.) |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | 0…40 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Weight | 330 g |
| Compatible products | CT Series Area Scan Cameras (MAX version) |
| Bore diameter | 38.5 mm |
| Inner length | 66 mm |
| Irradiation angle | 90 ° |
| Outer length | 70.5 mm |
1 unofficial data
Documents
Selection and applications
Illuminated large-field inspection. Global-shutter 12 MP measurement. Integrated 16 mm vision heads.
Minimum kit: MV-CT2MG0120/G/16LC/WN with its 16 mm C-mount liquid lens, an 8-pin M12 X-Code Gigabit Ethernet cable, and a PoE or 9–24 V DC source.
Nearby in the range: MV-CT2MG0120/G — Choose the compact C-mount body when the lens and light are selected separately; MV-CT2MG0050/G/16LC/WN — Choose 2448 × 2048 output for a higher 59.2 fps rate; MV-CT2MG0200/R/16LC/WN — Choose 5472 × 3648 when a 22.3 fps rolling shutter fits the scene.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- Power
- Power
- Mounting
- Camera mounts
FAQ
What optical components are integrated into the 12 MP /16LC/WN model?
The assembly contains a 16 mm liquid lens on a C-mount and integrated white light. Its total dimensions are 77 mm × 77 mm × 123.8 mm. This /16LC/WN configuration uses its integrated optic instead of the separately selected C-mount optics used with MV-CT2MG0120/G.
Which color, irradiation angle and power describe the integrated white light?
The integrated light is white, with a listed color temperature of 6000 K to 9000 K. It irradiates over 90° to the horizontal direction and is rated at approximately 7.7 W. The lens cap has a Ø38.5 mm bore and forms part of the illuminated optical head.
Can the integrated 12 MP camera use a single PoE network run?
The camera supports PoE over its Gigabit Ethernet installation and also accepts 9 V DC to 24 V DC. Data uses an 8-pin M12 X-Code connector. Typical camera consumption is 1.9 W at 24 V DC under the stated condition, while the built-in light is separately rated at approximately 7.7 W.
How quickly can the global shutter expose the 4096 × 3000 frame?
UltraShort exposure runs from 10 µs to 19 µs, and standard exposure covers 20 µs to 10 sec. The sensor is global shutter throughout. At full 4096 × 3000 resolution, the maximum stated rate is 23.9 fps in Mono 8 with lossless compression enabled.
Which environmental range applies to the assembled lens-cap version?
The camera alone operates from –30 °C to 60 °C, whereas the lens-cap assembly is rated from 0 °C to 40 °C. The complete integrated unit should therefore be applied within 0 °C to 40 °C. IP67 is conditional on proper installation of the lens, lens cap and cable.