Area camera · CT series
Hikrobot MV-CT2MG0032/G/16LC/WN
- Warranty
- 36 months
MAX version: what you get
What this version gives you:
- 8-pin M12 X-Code waterproof aviation connector
- IP67 (under proper lens and lens cap installation and wiring)
- 8-pin M12 A-Code waterproof aviation connector
- The 16 mm lens and the light are already built in — the camera controls focus and illumination
Same version, other sensor variant:
Integrated optics and deployment
An integrated 16 mm liquid lens and white light turn the 3.2 MP imaging core into the defining feature of MV-CT2MG0032/G/16LC/WN. The monochrome Stacked BSI CMOS sensor records 2048 × 1536 with a global shutter and reaches 77.5 fps in Mono 8 with lossless compression. A 1/1.8 in sensor with 3.45 × 3.45 µm pixels sits behind the C-mount liquid-lens assembly, while Gigabit Ethernet transports the images.
The combined optical head supports inspection stations that require onboard white illumination rather than a separately mounted light. Its source is rated at approximately 7.7 W, with a 6000 K to 9000 K color temperature and a 90° irradiation angle. Trigger Width and Trigger Controlled exposure suit synchronized acquisition, and the assembled 77 mm × 77 mm × 123.8 mm unit carries IP67 protection when the lens, cap and cable are installed correctly.
MV-CT2MG0032/G provides the same 2048 × 1536 and 77.5 fps capture in a 42 mm × 42 mm × 43 mm body for a separately selected C-mount lens. MV-CT2MG0050/G/16LC/WN keeps the integrated 16 mm optics and light but increases sampling to 2448 × 2048 at 59.2 fps. MV-CT2MG0120/G/16LC/WN reaches 4096 × 3000 at 23.9 fps when substantially more detail is needed.
Specifications
| Order code | MV-CT2MG0032/G/16LC/WN |
| Product type | 3.2 MP GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 1/1.8″ |
| Resolution | 2048 × 1536 px |
| Pixel size | 3.45 × 3.45 μm |
| Maximum frame rate | 77.5 fps @ 2048 × 1536 Mono 8 (lossless compression mode enabled) |
| Mono color | Mono |
| Pixel format | Mono 8/10/10Packed/12/12Packed |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Decimation | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal and vertical reverse image output |
| Dynamic range | 73.9 dB |
| Exposure time | High full well capacity: 30 μs to 10 sec High sensitivity: 5 μs to 10 sec |
| Exposure mode | Off/Once/Continuous exposure mode, supports Trigger Width and Trigger Controlled |
| Gain | High full well capacity: 0 dB to 12.8 dB High sensitivity: 0 dB to 24 dB |
| SNR | 42.4 dB |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 8-pin M8 A-Code aviation connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | Liquid lens/16mm |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11, 32/64-bit Linux |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption typ | Typ. 1.6 W @ 24 VDC (fast heat balance not enabled and external device not be controlled) |
| Ingress protection | IP67 (under proper lens and lens cap installation and wiring) |
| Operating temperature | –30 °C to 60 °C (–22 °F to 140 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 77 mm × 77 mm × 123.8 mm |
| Weight | Approx. 120 g (0.3 lb.) |
| Certification | CE, RoHS, KC |
| Compatibility | GigE Vision V2.0, GenICam |
| Data interface connector | 8-pin M12 X-Code waterproof aviation connector |
| Control interface | 8-pin M12 A-Code waterproof aviation connector |
| Camera body dimensions | 42 mm × 42 mm × 43 mm (1.7″ × 1.7″ × 1.7″) |
| Client software | MVS or third-party software meeting with GigE Vision Protocol |
| Integrated lens focal length | 16 mm |
| Integrated lens type | liquid lens |
| Integrated lens mount | C-mount |
| Integrated light type | white light |
| Integrated light color | White |
| Integrated light color temperature | 6000 K to 9000 K |
| Lens cap bore dimension | Ø38.5 mm |
| Integrated light irradiation angle | 90° (to the horizontal direction) |
| Integrated light power | Approx. 7.7 W |
| Lens cap outer length | 70.5 mm |
| Lens cap inner length | 66 mm |
| Lens cap weight | 330 g (0.7 lb.) |
| Lens cap ip rating | IP67(under proper installation of lens, lens cap, and cable) |
| Lens cap working temperature | 0 °C to 40 °C |
| Lens cap storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Lens cap humidity | 20% RH to 95% RH (no condensation) |
Selection and applications
Illuminated 3.2 MP inspection. Globally exposed moving-part capture. Integrated 16 mm optical stations.
Minimum kit: MV-CT2MG0032/G/16LC/WN with its 16 mm C-mount liquid lens, an 8-pin M12 X-Code Gigabit Ethernet cable, and PoE or a 9–24 V DC source.
Nearby in the range: MV-CT2MG0032/G — Choose the 42 mm × 42 mm × 43 mm body when separate C-mount optics are needed.; MV-CT2MG0050/G/16LC/WN — Choose 2448 × 2048 capture with the same 16 mm liquid-lens concept.; MV-CT2MG0120/G/16LC/WN — Choose 4096 × 3000 output when 23.9 fps is sufficient..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- Power
- Power
- Mounting
- Camera mounts
FAQ
What lens is incorporated in MV-CT2MG0032/G/16LC/WN?
The assembly incorporates a 16 mm liquid lens on a C-mount. Its overall lens designation is Liquid lens/16mm, and the body plus optical assembly measures 77 mm × 77 mm × 123.8 mm. This version is therefore selected as an integrated optical configuration rather than paired with the separately listed lenses for the standard model.
What are the output characteristics of the integrated white light?
The built-in source is white light with a color temperature from 6000 K to 9000 K. Its irradiation angle is 90° to the horizontal direction and its power is approximately 7.7 W. These values describe the illumination supplied by the /16LC/WN optical assembly.
How is the /16LC/WN camera powered and connected for data?
Image data uses 1 Gbit/s Gigabit Ethernet through an 8-pin M12 X-Code connector. The camera accepts PoE or a 9 V DC to 24 V DC input. Typical camera consumption is 1.6 W at 24 V DC under the stated condition; the integrated light is listed separately at approximately 7.7 W.
Which temperature limit governs the complete optical assembly?
The camera body is rated from –30 °C to 60 °C, but the lens-cap assembly has a working range of 0 °C to 40 °C. For the integrated configuration, the narrower 0 °C to 40 °C range governs operation of the complete assembly. Storage for both is stated up to 80 °C.
What changes relative to the standard MV-CT2MG0032/G body?
Resolution, global shutter and the 77.5 fps maximum remain the same. The standard camera is a 42 mm × 42 mm × 43 mm C-mount body, while /16LC/WN adds the 16 mm liquid lens, white light and lens cap, producing a 77 mm × 77 mm × 123.8 mm integrated assembly.