Vision sensor · SC3000 series
Hikrobot MV-SC3030XM
- Warranty
- 36 months
Detailed mono work at moderate cadence
Mono global-shutter acquisition at 2048 × 1536 and 40 fps defines MV-SC3030XM as the mid-resolution grayscale member of the SC3000X group. Its 1/1.8-inch CMOS sensor uses 3.45 µm pixels and accepts exposures from 6 µs to 1 sec. The 16 mm optical system uses an M12 mount with mechanical autofocus, and white spot illumination is standard with red, blue or IR point-source alternatives.
Grayscale measurement, OCR, code recognition, object detection, anomaly detection and coordinate conversion can be assembled into detailed inspection sequences. The global shutter and 6 µs minimum exposure support moving-part capture when sufficient light is available. A 12-pin M12 connector combines 24 V DC, three opto-isolated inputs, three opto-isolated outputs and RS-232, while Fast Ethernet provides the data interface.
MV-SC3030XC preserves the 2048 × 1536 grid, 40 fps rate and 3.45 µm pitch but provides color processing. MV-SC3013XM reduces mono resolution to 1216 × 1024 and raises speed to 60 fps with 6.9 µm pixels. MV-SC3050XM keeps mono capture at 40 fps and increases the frame to 2432 × 2048. Choose MV-SC3030XM when the 3.1 MP-class frame balances detail with cadence; step up for more samples or down for more speed.
Specifications
| Sensor type | CMOS, global shutter |
| Sensor format | 1/1.8″ |
| Resolution | 2048 × 1536 |
| Pixel size | 3.45 µm × 3.45 µm |
| Maximum frame rate | 40 fps |
| Mono color | Mono |
| Exposure time | 6 μs to 1 sec |
| Gain | 0 dB to 15 dB |
| Data interface | Fast Ethernet (100 Mbit/s) |
| Digital I/O | 12-pin M12 connector provides power and I/O, including opto-isolated input (LINE 0/1/2) × 3, opto-isolated output (LINE 3/4/5) × 3, and RS-232 × 1. Supports triggering device via pressing top trigger button |
| Lens mount | M12-mount, mechanical autofocus supported |
| Focal length | 16 mm |
| Light source | White spot light source. Red/blue/IR point light source is optional |
| Storage | Supports importing and exporting project, up to 32 projects can be stored. |
| Power supply | 24 VDC |
| Power consumption | Avg. 7 W @ 24 VDC (light source enabled); Max. 22 W @ 24 VDC (light source enabled) |
| Ingress protection | IP67 (under proper installation of waterproof lens cap) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | Straight angle: 80.1 mm × 43 mm × 44.3 mm (3.2″ × 1.7″ × 1.7″); Right angle: 58.5 mm × 43 mm × 65.4 mm (2.3″ × 1.7″ × 2.6″) |
| Weight | Approx. 190 g (0.4 lb.) |
| Certification | CE-EMC,KC |
| Algorithms | Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness analysis, L2L angle, diameter measurement, line angle; Existence: Spot existence, edge existence, contour existence, pattern existence, circle existence, line existence, anomaly judge, existence detection; Count: Spot count, edge count, contour count, pattern count, learning-based count; Recognition: Multi-object count, code recognition, category recognition, classification registration, object detection registration, OCR, learning OCR, character horizontal stripe detection; Logic: Calculator, If module, logic judge, format output, condition judge, character comparison, combination judge; Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture; Deep learning: DL classification, DL object detection; Defect detection: Anomaly detection; Industry tools: OCR and defect detection |
| Software | SCMVS |
| Communication protocol | RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV |
| Aiming system | 1 LED |
| Indicator | 360° visual indicator |
Selection and applications
Three-megapixel mono measurement. Grayscale OCR and code checks. Triggered defect inspection.
Minimum kit: To run MV-SC3030XM, combine its 16 mm mechanically autofocused M12 optical path with the selected spot light, a Fast Ethernet cable, a 12-pin M12 I/O lead and 24 V DC power.
Nearby in the range: MV-SC3030XC — Use it when color information is required at 2048 × 1536 and 40 fps.; MV-SC3013XM — Choose it for a faster 60 fps mono stream at 1216 × 1024.; MV-SC3050XM — Prefer it for 2432 × 2048 mono detail without changing the 40 fps ceiling..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- ID data cablesID Ethernet, M12 8-pinGigE
- I/O & power cables
- ID power, M12 12-pin
- Power
- Power
- Optics
- M12 lenses
- Lighting
- SC lightingID/SC lighting
- Mounting
- Camera mounts
- Protection
- Covers & filters
FAQ
How much mono detail can MV-SC3030XM capture at 40 fps?
The global-shutter CMOS sensor delivers 2048 × 1536 mono images at up to 40 fps. Its 1/1.8-inch format uses 3.45 µm pixels, giving the model a 3.1 MP-class sampling grid for grayscale inspection.
What exposure and gain controls are provided by MV-SC3030XM?
Exposure is adjustable from 6 µs to 1 sec, and gain runs from 0 dB to 15 dB. Those ranges allow the image level and motion exposure to be balanced around the selected spot illumination and target speed.
Which lens configuration is identified for the MV-SC3030XM?
The model lists a 16 mm focal length, an M12 mount and support for mechanical autofocus. White spot light is standard, with red, blue or IR point sources optional, and one aiming LED helps place the image.
Can MV-SC3030XM store multiple inspection projects internally?
Yes. Up to 32 projects can be stored, with import and export supported. The available processing includes OCR, code recognition, measurement, anomaly detection, object detection and coordinate tools for those projects.
For which inspection rates is MV-SC3013XM faster than MV-SC3030XM?
MV-SC3013XM reaches 60 fps, compared with 40 fps for MV-SC3030XM, but its frame is 1216 × 1024 rather than 2048 × 1536. Both are mono global-shutter models; their pixel pitches are 6.9 µm and 3.45 µm respectively.