Vision sensor · SC3000 series
Hikrobot MV-SC3050XC
- Warranty
- 36 months
Five-megapixel color applications
Color analysis across 2432 × 2048 pixels places MV-SC3050XC at the detailed end of the global-shutter SC3000X range. Its 1/1.45-inch CMOS sensor uses 3.45 µm pixels and reaches 40 fps, with exposure adjustable from 6 µs to 1 sec. The M12 mount supports mechanical autofocus. A white spot light is fitted by default, while red, blue or IR point-light options allow the illumination response to be matched to the object.
Color recognition, OCR, code reading, object detection, learning-based counting, anomaly detection and coordinate conversion can share one sensor project. This combination suits detailed label, colored-part, feature and position checks on indexed or moving targets. The 12-pin M12 connection carries 24 V DC, three opto-isolated inputs, three opto-isolated outputs and RS-232; Fast Ethernet handles communication, and up to 32 projects can be stored.
MV-SC3050XM uses the same 2432 × 2048 global-shutter format and 40 fps limit in mono. MV-SC3030XC retains color and 40 fps but records 2048 × 1536 on a 1/1.8-inch sensor. MV-SC3060XC increases color resolution to 3200 × 1920, changes to a rolling shutter and lowers the rate to 20 fps. Select MV-SC3050XC when color detail, global exposure and 40 fps must coexist; choose MV-SC3060XC for a denser, slower scene.
Available versions
Same device, different configuration. We match the part number to your working distance and field of view.
| Part number | PN | Lens | Cable exit | |
|---|---|---|---|---|
| MV-SC3050XC-12M-WBN | 308600743 | 12 mm | — | |
| MV-SC3050XC-12M-WBN-S | 308600973 | 12 mm | side cable | |
| MV-SC3050XC-16M-WBN | 308600745 | 16 mm | — | |
| MV-SC3050XC-16M-WBN-S | 308600974 | 16 mm | side cable |
Specifications
| Sensor type | CMOS, global shutter |
| Sensor format | 1/1.45″ |
| Resolution | 2432 × 2048 |
| Pixel size | 3.45 µm × 3.45 µm |
| Maximum frame rate | 40 fps |
| Mono color | Color |
| Exposure time | 6 μs to 1 sec |
| Gain | 0 dB to 15 dB |
| Data interface | Fast Ethernet (100 Mbit/s) |
| Digital I/O | 12-pin M12 connector provides power and I/O, including opto-isolated input (LINE 0/1/2) × 3, opto-isolated output (LINE 3/4/5) × 3, and RS-232 × 1. Supports triggering device via pressing top trigger button |
| Lens mount | M12-mount, mechanical autofocus supported |
| Light source | White spot light source. Red/blue/IR point light source is optional |
| Storage | Supports importing and exporting project, up to 32 projects can be stored. |
| Power supply | 24 VDC |
| Power consumption | Avg. 7 W @ 24 VDC (light source enabled); Max. 22 W @ 24 VDC (light source enabled) |
| Ingress protection | IP67 (under proper installation of waterproof lens cap) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | Straight angle: 80.1 mm × 43 mm × 44.3 mm (3.2″ × 1.7″ × 1.7″); Right angle: 58.5 mm × 43 mm × 65.4 mm (2.3″ × 1.7″ × 2.6″) |
| Weight | Approx. 190 g (0.4 lb.) |
| Certification | CE-EMC,KC |
| Algorithms | Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness analysis, L2L angle, color measurement, color size, diameter measurement, line angle; Existence: Spot existence, edge existence, contour existence, pattern existence, circle existence, line existence, anomaly judge, existence detection; Count: Spot count, edge count, contour count, pattern count, learning-based count, color count; Recognition: Multi-object count, code recognition, color contrast, color recognition, category recognition, classification registration, object detection registration, OCR, learning OCR, character horizontal stripe detection; Logic: Calculator, If module, logic judge, format output, condition judge, character comparison, combination judge; Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture; Deep learning: DL classification, DL object detection; Defect detection: Anomaly detection; Industry tools: OCR and defect detection |
| Software | SCMVS |
| Communication protocol | RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV |
| Aiming system | 1 LED |
| Indicator | 360° visual indicator |
Selection and applications
Detailed color defect analysis. High-density label recognition. Global-shutter position checks.
Minimum kit: A working system combines MV-SC3050XC, a mechanically autofocused M12 lens and selected spot illumination with Fast Ethernet, a 12-pin M12 I/O cable and a 24 V DC supply.
Nearby in the range: MV-SC3050XM — Prefer it when 2432 × 2048 inspection should use monochrome images at 40 fps.; MV-SC3030XC — Use it when 2048 × 1536 color sampling provides enough detail at the same rate.; MV-SC3060XC — Choose it for 3200 × 1920 color resolution when 20 fps rolling-shutter capture fits..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- ID data cablesID Ethernet, M12 8-pinGigE
- I/O & power cables
- ID power, M12 12-pin
- Power
- Power
- Optics
- M12 lenses
- Lighting
- SC lightingID/SC lighting
- Mounting
- Camera mounts
- Protection
- Covers & filters
FAQ
What color image performance does MV-SC3050XC deliver?
The 1/1.45-inch CMOS sensor records 2432 × 2048 color frames at up to 40 fps. It uses a global shutter and 3.45 µm pixels, with exposure adjustable from 6 µs to 1 sec and gain from 0 dB to 15 dB.
Which high-detail tasks can MV-SC3050XC process onboard?
Its functions include color recognition, color measurement, OCR, learning OCR, code recognition, object detection, learning-based counting and anomaly detection. Measurement and coordinate tools support dimensional and position decisions.
How are focus and illumination configured on MV-SC3050XC?
An M12 mount with mechanical autofocus is listed. The standard source is a white spot light, with red, blue or IR point sources available as alternatives, and one aiming LED supports placement of the inspection view.
What power and I/O resources are available on MV-SC3050XC?
The sensor takes 24 V DC and uses 7 W on average or 22 W maximum with its light enabled. A 12-pin M12 connection provides three opto-isolated inputs, three opto-isolated outputs and RS-232 alongside power.
Why choose MV-SC3050XC rather than the MV-SC3060XC?
MV-SC3050XC uses a global shutter and reaches 40 fps at 2432 × 2048. MV-SC3060XC provides a larger 3200 × 1920 color image but uses a rolling shutter and reaches 20 fps, with exposure starting at 540 µs.