Area camera · CT series
Hikrobot MV-CT2MG0200/R/16LC/WN
- Lead time
- from 5 days
- Warranty
- 36 months
MAX version: what you get
Same version, other sensor variant:
Integrated 20 MP optical head
High-density capture and an integrated optical assembly meet in MV-CT2MG0200/R/16LC/WN. Its Sony IMX183 monochrome CMOS sensor records 5472 × 3648 through a 16 mm C-mount liquid lens, while built-in white light is included in the assembly. The 1 in, 2.4 × 2.4 µm rolling-shutter sensor reaches 22.3 fps in losslessly compressed Mono 8 over Gigabit Ethernet.
The 20 MP format addresses stationary defect inspection and broad-field measurement where the camera, 16 mm liquid lens and integrated white light form one package. Illumination is approximately 7.7 W at 6000 K to 9000 K with a 90° irradiation angle. The camera offers Rolling and Global Reset modes and triggered exposure from 46 µs to 2.78 sec. Its completed 77 mm × 77 mm × 123.8 mm enclosure is IP67 after correct assembly.
MV-CT2MG0200/R provides identical Sony IMX183 imaging at 5472 × 3648 and 22.3 fps in a smaller body for separate C-mount optics. MV-CT2MG0120/G/16LC/WN retains the integrated 16 mm lens and light but uses a 4096 × 3000 global shutter at 23.9 fps. MV-CT2MG0050/G/16LC/WN reaches 59.2 fps at 2448 × 2048. Choose this version when the 20 MP rolling-shutter format and integrated head are both required.
Specifications
| Shutter | rolling |
| Sensor model | Sony IMX183 |
| Nominal optical sensor format | 1″ |
| Sensor resolution | 5472×3648 px1 |
| Maximum frame rate | 5.9 fps @ uncompressed, Mono8, camera body, resolution 5472×3648 px; 22.3 fps @ lossless compression, Mono8, camera body, resolution 5472×3648 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | GigE1 |
| Sensor technology | CMOS |
| Pixel size | 2.4×2.4 µm1 |
| Dynamic range | 65.9 dB |
| Signal-to-noise ratio | 41.3 dB1 |
| Exposure time | 46…2780000 µs |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled, global reset, rolling shutter |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Control interface | M12 8-pin A-coded |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Power supply | 9…24 V @ DC, external power supply |
| Power delivery | external power supply |
| PoE support | yes1 |
| Power consumption | 1.9 W (typical) @ DC, not controlling external device, fast heat balance off, camera body, supply voltage 24 V |
| Ingress protection | IP671 |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing1 |
| Dimensions | 42×42×43 mm @ camera body |
| Weight | 120 g (approx.) @ camera body |
| Certification | CE, RoHS, KC |
| Physical sensor diagonal | 16 mm1 |
| Reverse image | horizontal, vertical |
Kit contents
Integrated lens
| Lens mount | C-mount |
| Focal length | 16 mm |
| Integrated lens type | liquid lens |
Lens cap with light
| Integrated light color | white |
| Color temperature | 6000…9000 K |
| Power consumption | 7.7 W (approx.) |
| Ingress protection | IP67 @ with lens, lens cap and cables properly installed |
| Working temperature | 0…40 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Weight | 330 g |
| Compatible products | CT Series Area Scan Cameras (MAX version) |
| Bore diameter | 38.5 mm |
| Inner length | 66 mm |
| Irradiation angle | 90 ° |
| Outer length | 70.5 mm |
1 unofficial data
Documents
Selection and applications
Integrated-light surface inspection. Indexed high-density measurement. Sony IMX183 optical heads.
Minimum kit: MV-CT2MG0200/R/16LC/WN with its 16 mm C-mount liquid lens, an 8-pin M12 X-Code Gigabit Ethernet cable, and PoE or 9–24 V DC power.
Nearby in the range: MV-CT2MG0200/R — Choose the compact body when separate C-mount optics and lighting are required; MV-CT2MG0120/G/16LC/WN — Choose a 4096 × 3000 global shutter at 23.9 fps; MV-CT2MG0050/G/16LC/WN — Choose 2448 × 2048 when the higher 59.2 fps rate matters.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which lens and sensor are combined in this integrated 20 MP camera?
The optical head combines a 16 mm liquid lens on C-mount with a 1 in Sony IMX183 monochrome sensor. The sensor has 2.4 × 2.4 µm pixels and records 5472 × 3648. The complete camera-and-lens-cap assembly measures 77 mm × 77 mm × 123.8 mm.
What color temperature, irradiation angle and power are listed for the built-in light?
The built-in source is white light. Its color temperature is 6000 K to 9000 K, irradiation angle is 90° to the horizontal direction, and power is approximately 7.7 W. The lens-cap bore is Ø38.5 mm.
Which shutter modes are available for the Sony IMX183 version?
The sensor is rolling shutter, and the camera supports both Rolling and Global Reset modes along with Trigger Width and Trigger Controlled exposure. Exposure spans 46 µs to 2.78 sec. Motion should still be planned around rolling-shutter readout rather than treated as global exposure.
How are power and image data supplied to the integrated head?
Gigabit Ethernet data uses an 8-pin M12 X-Code connector, and the camera can receive power by PoE or from 9 V DC to 24 V DC. Typical camera consumption is 1.9 W at 24 V DC under the stated condition. The integrated white light is rated separately at approximately 7.7 W.
What temperature range governs the full 20 MP assembly?
The camera body is rated from –30 °C to 60 °C, while the lens-cap assembly is rated from 0 °C to 40 °C. Operation of the completed head should follow the narrower 0 °C to 40 °C interval. IP67 depends on correct installation of lens, cap and cable.