Lenses · Optics
Liquid lenses for CT MAX cameras
Focusing is electrical: the optical power of the liquid element changes on command from the camera, with no moving mechanical parts. 1.1″ format, C-mount, 0.1 m minimum object distance, fixed iris. Power and control run over a four-wire lead (DC, GND, Lens_TX, Lens_RX) from the CT MAX camera.
- Warranty
- 36 months
Specifications
| Mount | C-mount |
| Minimum object distance (MOD) | 0.1 m |
| Operating temperature | Working temperature: 0 °C to 40 °C; storage: –10 °C to 60 °C |
| Certification | RoHS 2.0 |
| Iris control | Fixed |
| Focus control | Liquid lens focusing |
| Flange focal length | 17.526 mm |
Part numbers and versions
| Part number | PN | Focal length | Aperture | Format | |
|---|---|---|---|---|---|
| MVL-KF1650-Q304 | 102206040 | 16 mm | F5.0 | Ø17.6 mm (1.1") | |
| MVL-KF2553-Q304 | 102206041 | 25 mm | F5.3 | Ø17.6 mm (1.1") | |
| MVL-KF3562-Q304 | 102206042 | 35 mm | F6.2 | Ø17.6 mm (1.1") |
How to choose
The refocusing range is set by the camera, not the lens: the liquid element shifts focus between the 0.1 m minimum object distance and infinity. Focal length is chosen as for any fixed-focal lens — from working distance and field width; a 1.1″ sensor is 14.1 mm wide, so a 200 mm field at 300 mm needs ≈ 21 mm. Check the FOV table in the datasheet for exact figures.
Compatible cameras and code readers
and 25 more — Area scan cameras →
Equipment categories this accessory is matched to:
Series per manufacturer data:
FAQ
What optical property changes when a CT MAX liquid lens refocuses?
The CT MAX camera commands a change in the optical power of the liquid element. Focusing is electrical and uses no moving mechanical parts. The camera sets the refocusing span between the 0.1 m minimum object distance and infinity.
How should focal length be chosen for the required field?
Base focal length on working distance and field width. For the stated 14.1 mm-wide 1.1″ sensor, the example says that a 200 mm field at 300 mm needs approximately 21 mm. The datasheet FOV table is the final reference for exact figures.
How do the three listed Q304 liquid-lens versions differ?
MVL-KF1650-Q304 is listed at 16 mm and F5.0, MVL-KF2553-Q304 at 25 mm and F5.3, and MVL-KF3562-Q304 at 35 mm and F6.2. All three retain the Ø17.6 mm (1.1″) format, C-mount and fixed-iris arrangement.
What wiring is used for liquid-lens power and control?
A four-wire lead runs from the CT MAX camera to the lens. Its listed connections are DC, GND, Lens_TX and Lens_RX. This lead carries both power and control, so its connection belongs in the optical setup check.
Does electrical refocusing remove the focal-length decision?
No. The liquid element moves focus from the 0.1 m minimum object distance toward infinity, but focal length is still chosen from field width and working distance. The available fixed focal lengths are 16 mm, 25 mm and 35 mm.